What are the advantages of wall washers?

1. Power: The power of LED wall washers determines the distance of its projection, and generally has 18W, 24W, 36W, 48W and other parameters. But the power is not fixed. The power can be flexibly changed according to the requirements! Generally, high-power LED wall washers refer to single rows, and multi-row ones are called linear LED floodlights!

2. Voltage: The voltage of LED wall washer can be divided into DC DC and AC AC, generally built-in power supply external AC220V (Japan AC110V) mains power, etc., external is generally low-voltage DC24V, DC12V, DC27V and so on. According to different requirements, different manufacturers, the voltage is also different.

3, IP protection level: this is an important parameter of LED wall washers, but also an important indicator affecting the quality of the current LED floodlight, the waterproof level is required to be above IP65 is Z best, but also require the relevant pressure resistance, chipping resistance, high and low temperature resistance, flame resistance, impact aging level.

4. Color specifications: divided into seven colors, full color, single color.

5. Color temperature: about 2200K (amber) 3000K (warm white) 4000K (incandescent lamp) 6000K (positive white) 7000K (cold white)

6, luminous angle: LED wall washer light its luminous angle is generally narrow (about 20 degrees), medium (about 50 degrees), wide (about 120 degrees) three, at present, Henghaoxin high-power LED wall washer (narrow angle) Z far effective projection distance of 5-10 meters.

7, working temperature: because LED wall washer lamp is usually used outdoors, so this parameter is more important, the temperature requirements are relatively high, in general, we require outdoor temperature in -40 °C + 60 °C can work.

8. Control mode: For LED wall washers, there are currently two control methods: internal control and external control. Internal control is not to use an external controller, the designer designs the control system in the LED wall washer, the degree of effect can not be changed. The external control is an external controller, and its effect can be changed by adjusting the buttons of the main control. Usually on large-scale lighting projects, customers require that they can change the effect by themselves, and we use this scheme of external control.